so maplin sells LDR's in varying resistance bands, which do u recommend?
http://www.maplin.co.uk/Module.aspx?ModuleNo=35962
i know i should be doing my uni work but this is so simple i can pick up the parts on my way home and have some 'me time' 
hi kneale, i went with the n46ay's....ive had a few different ones though and there didnt seem much different in the response...
@metalupyaeye. both led legs to ground...have you got a breadboard?, i would sort this out on there first...
@tombola, yes i stuck a 1000uf across 9v - and it was silent, extreme i know but it worked and was quick to grab from a pile of bits
..maybe try a 220/470..!!!!!..or do what barcode recommends.
@earthscum, yeah the 40106 should be ok, as in
beavis optochopto...check it out everyone...its an alternative...
anyway,hi guys . ive been a busy little bee again, and finally got round to combining the colorsound wah with the tiny trem,
into one unit/pedal design.. it will be a 3 in 1 pedal with 2 toggle switches, so you will have
wah, trem ,and a tremwah....switchable.....i kind of like the wah as a non treadle filter type thing..and its great with the trem too..quackolo..
the only problem i can see is running both off the same dc socket, anyone got any idea if this would be a problem?.....................
@perrow, your going to be busy with this pcb layout...

but it would be nice to have this on pcb, as the vero is understandably wide due to my veroing skills..(wheres adriano the master vero shrinker demon?.).
heres the idea..messy i know, was up late doing it...

here ya go...

basically i glued a wah to the trem with a couple of toggles................

any ideas, advice, any faults you can see...


?.....